# The edge gets dressed before the tool goes into storage > A lawnmower cylinder blade drawn against the shed boards, sharpened and oiled at the point in the year nobody wants to do it. August 20, 2026 · https://justog.club/stories/he-sharpens-it-before-storing A lawnmower cylinder blade, drawn standing on end against vertical shed boards. Cream and rust orange, the cut edges bright where the rest of the assembly sits darker, a film of oil catching the light across the metal. An oily rag hangs beside it. No lettering anywhere on the print. The mower won't come out again for months. The blade got its attention today anyway. ## Why does the blade get sharpened before it's put away, rather than before the mower comes back out? Because by the time the mower comes back out, the damage from a season of damp storage has already been done — sharpening then only fixes what should never have happened. Doing the job at the end means the blade goes into the shed clean, dry and dressed, and comes out the other side exactly as it went in. Doing it at the start means the blade spent the whole gap between seasons rusting quietly where nobody could see it, and the first job of the new season is repair rather than a straight start. The timing isn't a preference — it's the only point where the work actually prevents something instead of just responding to it. ## Why does a sharp, oiled edge survive that gap and a blunt, damp one doesn't? Because rust needs a foothold, and a clean sharpened edge with a film of oil across it doesn't offer one the way a rough, damp edge does. A blade left blunt keeps a rougher surface and whatever grass residue was on it when the mower last ran; moisture sits in that texture for months undisturbed. A blade that's been dressed to a clean edge and wiped with oil presents almost nothing for damp air to work on. The sharpening and the oiling aren't two separate jobs done at the same time out of thoroughness — the sharpening is what makes the oiling actually hold. ## What's the harder choice being made here — sharpening now, or waiting? Doing it now, when the blade has just come off a season's use and nobody feels like starting another job. Putting it off until spring is the easier call every single time it comes up, because nothing is visibly wrong with the blade in that moment — it cut the grass fine an hour ago. The discipline is doing the maintenance at the point it's least urgent-looking and most useful, rather than waiting for the moment it's obviously needed, by which point the rust has already started. [A workshop where every tool gets marked before it goes out the door, not after it's lost](/stories/his-tools-are-labelled) runs on the same logic — the effort lands before the problem, not after it. ## Do I need permission to draw a lawnmower blade like this one? No — a cylinder blade's shape and construction are a mechanical form, not anybody's artwork, and nothing here carries a maker's name or stamp. If a specific manufacturer's branding or a stamped model number is the point of a particular design, that's licensable the way any company's mark is, and the usual rules apply. Drawn plainly, without a badge or a part number, a mower blade is just a tool being drawn accurately. ## Does the same care apply to other blades kept in the same shed? Yes — anything with an edge that sits idle for months benefits from being put away sharp rather than being sharpened on the way back out. Secateurs left blunt over a dormant season pick up exactly the same problem, which is most of why [the choice between a bypass blade and an anvil blade](/stories/secateur-blade-and-anvil) matters less than whether either one goes away clean. [A shed organised so anyone can find the right tool without hunting](/stories/the-shed-is-a-filing-system) is the same discipline applied to the whole space rather than one blade. ## Isn't sharpening something that won't be used again until spring a wasted afternoon? No — the afternoon is short, and the alternative is a longer one spent scraping rust off in spring instead of mowing. A cylinder blade takes a few passes with a file and a wipe of oil; a rusted one takes considerably longer to bring back, if it comes back cleanly at all rather than needing replacing. The maintenance isn't wasted because the mower is idle — it's aimed precisely at the idle period, which is the only time rust actually gets the chance to take hold. ## Does a blade drawn like this print well? Yes, provided the bright cut edge and the duller body stay as two clearly separated tones rather than blending into one soft metallic gradient. A photographic metal sheen goes muddy at fabric scale; a hard line between the sharpened edge and the rest of the blade, plus a flat indication of oil rather than a rendered highlight, holds up the way [simple, confident shapes do on a printed garment](/stories/bold-shapes-survive-fabric). Two or three inks — the cream body, the rust patches, one dark tone for the boards behind — is enough. ## How do I get one made? Describe the blade at [JustOG](/) — what tool it's from, how the oil sits on the metal, what's behind it. Pick a direction, drag the crop frame, see it composited on the real garment, and it's made to order and shipped. Designs other people have published are in the [shop](/shop). The rag stays hanging by the blade. Neither of them is going anywhere until spring finds them ready.