# Forty flyers deep, and the top one is blank

> One pole holds one fresh flyer and the torn remains of roughly forty before it. The staples outlast the paper, and what's underneath is the real record of who used that square metre.

August 21, 2026 · https://justog.club/stories/the-flyer-stapled-at-eye-height

On umber, a wooden pole shown close and straight on, its whole surface gone dense with paper: one
fresh flyer stapled squarely at the centre, and radiating out from under it, torn corner over torn
corner, the remnants of roughly forty flyers nobody ever took down.

The fresh one carries no image and no words. The pole doesn't need it to.

Eye height is not a coincidence — it's the one measurement every person who's ever stapled a flyer
to a pole has agreed on, without a meeting, for as long as there have been poles.

## Why is a flyer always stapled at eye height?

Because a flyer that isn't read in the two seconds it takes to walk past has already failed.

Above head height it needs a step somebody isn't carrying. Below the waist it competes with a dog
and gets kicked. Eye height is the band a walking adult scans without slowing down, and every
person who's put one up worked that out on their own, by trying the other heights first and
watching nobody look.

## What's actually under the fresh flyer?

A stack of history nobody archived on purpose.

Pull the staples on any well-used pole and the layers underneath run for months: a torn corner
here, a strip gone translucent with weather two layers down, a bare staple line where something was
ripped clean off by a passer-by or a rival poster. Paper rots, fades and tears away long before a
staple does — so what survives longest on the pole isn't the message, it's the fastener, which is a
different kind of record from [the one a strip of tear-offs keeps](/stories/the-tear-off-strip-at-the-bottom),
but the same idea: the object reports on itself.

## Why print the fresh flyer blank?

Because the pole is already saying the whole thing without it.

A flyer with a show printed on it is a flyer for that show. A blank one, stapled at the same
square, over the same forty ghosts, is a flyer for the act of putting one up — which is the object
this design is actually about. Fill it with invented text and the eye goes straight to reading it;
leave it blank and the eye has nowhere to land except the layers, which is where the real
information was the whole time.

## Does this work for something other than a gig?

The pole doesn't care what the flyer says, so the design travels to anything that gets stapled to
one.

A lost cat, a room to rent, a market on a Saturday, a band with no other way to announce when — all
of them get stapled to the same posts, in the same band of height, and all of them get buried the
same way inside a season, [the same way a card on a shop's board gets buried under the next
one](/stories/the-record-shop-noticeboard). It's the same infrastructure either way.

## Isn't a blank flyer just an empty rectangle?

Only if you take the pole away.

A plain flat-coloured square on its own is nothing. Put it back on forty layers of torn paper and
staples and the blank one reads as the newest entry in a sequence — a completely different object.
The layers do the work a printed headline would otherwise have to do, without inventing a show that
never happened.

## Can I use a real venue's flyer design?

A specific flyer — its layout, its logo, its listed acts — belongs to whoever made it, and asking
before reproducing it is the right order of operations, the way any degraded, photocopied look
belongs to the person who drew the [original design being copied](/stories/acid-rave-flyer-aesthetic)
and not to the style it's built from.

What's free is the format: staples, layering, eye height, torn corners. A blank one stapled over
your own invented history is also the stronger shirt — a record of a square metre nobody else has
stood in front of.

## Does it print well?

Yes, and the layering is exactly the kind of detail that survives fabric. Flat colour for the fresh
flyer, hard torn edges underneath it, staples rendered as small solid marks rather than fine
outlines — all of that holds up at garment resolution. Fine printed type on the buried layers would
fail; keep those as texture and tearing, not as legible words, and the print stays sharp instead of
turning to mud.

## How do I get one made?

Describe the pole at [JustOG](/) — how many layers, what's torn away, what the fresh one is
stapled over. Pick a direction, drag the crop frame, see it composited on the real garment, and
it's made to order and shipped.

Designs other people have published are in the [shop](/shop).

The staple is still there when the paper is gone. That's the whole design.